Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
KVH
Darth Vader
Offline
The upright center bracket of my TR4A (the one below the dash with the heater controls) appears nicely covered with what I assume is a 5 to 10 year old leather or vinyl wrapping from Moss or VB.
There are no visible holes or openings for the radio, though the vinyl is stamped or pressed to show an oblong depression for what would be the face plate of a radio.
When I had this bracket out a few months ago, I couldn't see any evidence that any cut holes existed for the radio beneath the hard foam coating on the back side.
Question: Are there most likely some holes behind that material that I can't see, or is it assumed that the owner will cut completely new openings.
I called Moss and they were uncertain.
thx
There are no visible holes or openings for the radio, though the vinyl is stamped or pressed to show an oblong depression for what would be the face plate of a radio.
When I had this bracket out a few months ago, I couldn't see any evidence that any cut holes existed for the radio beneath the hard foam coating on the back side.
Question: Are there most likely some holes behind that material that I can't see, or is it assumed that the owner will cut completely new openings.
I called Moss and they were uncertain.
thx
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.