• Hey Guest!
    BCF is a resource offered at no cost to the Little British Car community. We do not require you to pay to play here. However, if you find BCF helpful, appreciate no pop up ads, and you want to ensure we stay online - Please support us with an "optional" low-cost (less than many car club dues) member upgrade. There are some benefits to upgrading!
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

standard-triumph hardware catalog

Share this page

PeterK

PeterK

Yoda
Offline
Does anyone have a legible scan of the standard-triumph hardware catalog? ISTR that someone touched up the scan that's on the web, with improved readability.

tia
PK
 
Thanks Peter, Thanks Don:

I have green and blue parts books plus Bentley.
I stopped using the parts books a while back due
to lack of specifics. I had forgotten the blow-up
sheets. My bad.

The Triumph hardware download is worth it's weight
in gold! Because I have no point of reference, I remove
car parts, drive them over to the speciality fastener shop
and more or less purchase blind , bolts and nuts that fit.

Now I can purchase specific!

fantastic,

thanks both.

d
 
Actually, the parts books can be rather helpful. If you see a "traditional" six-digit Triumph part number, theres' something relatively special about the bolt/nut/whatever. But if there's a number such as KX4508, that number tells you it is a setscrew, cross-recess, flat countersunk 80 degre head, No. 10 UNF, 1" in length.

There is a summary chart for all this at the Canley Classics web site.
 
Don/Peter:

I think I have it correct now. Do
either of you see any blatant blunders
in my set up to install the trailing arm
Paul sent to me?

Thanks,

D

Bushparts.jpg
 
Uh, just one Dale. You forgot to install them on the car!

Joking aside, looks good from what I can see.

I would check the u-joint flange assembly - I don't think that they use washers but I don't have a TR6 parts manual so I don't really have any reference. On my TR4A, I found that I had to use the factory flange bolts because the new ones that I bought were a little too long. It's more common to find that TR use a lot of 1/4" increment bolt lengths (even some 1/8" increments) and very uncommon to find them at the hardware store.

Now you got to do it.

One more thing. It looks like you are using grade 8 bolts. Be sure to also use grade 8 washers and nuts with them.
 
Mr Tinster, Dunno if you got the chance to explore the permatex url that someone posted. I think it might be worthwhile for you(and anyone installing nuts and bolts and gaskets) to eyeball the website. I've been using "The RIght Stuff for better than 8 years and it's great. Loctite(Same as Permatex fasten stuff) takes the place of lots and lots of lockwashers.

https://www.permatex.com
 
Similar threads
Thread starter Title Forum Replies Date
T Wanted Workshop manual for Triumph 10 [Standard 10] Triumph Classifieds 4
C Triumph Standard Flying 8 Triumph 5
rlich8 Standard-Triumph Engine Package Diagram Triumph 4
K Early 50's Standard Triumph 1/2 Ton? Triumph 8
TR4nut Standard Triumph Gray Colors for Russ.. Triumph 15
T Neat project - Triumph Standard 10 Triumph 11
Sherlock History question - Standard-Triumph of Belgium Triumph 3
UltimateQuestion Standard-Triumph T-10 Triumph 10
S Standard Triumph publications list source wanted Triumph 0
WHT For Sale Montrose Enclosed Aluminum Trailer - 76-inch Height Fits In Standard House Garage MG Classifieds 1
WHT For Sale Montrose Enclosed Aluminum Trailer - 76-inch Height Fits In Standard House Garage Austin Healey Classifieds 1
S Wanted 1949 standard vanguard Other British Classifieds 0
W TR6 Anyone add Exhaust tips to standard exhaust Triumph 4
HalLucy Standard Vanguard Sportsman engine and the TR3 Other British Cars 7
M TR2/3/3A Standard Engine Trust Washer Thickness Triumph 18
S General Tech Standard for the Girling Bubble Flare Triumph 15
Mickey Richaud General TR Standard 10 Pickup! Triumph 3
T 1933 Standard Little Nine Carburetor Other British Cars 8
NutmegCT 1951 Standard Vanguard Other British Cars 3
Lbp TR2/3/3A TR3A - Converting Adjustable Steering Wheel to Standard? Triumph 16
Tim Tucker TR2/3/3A TR2-4 86mm standard rings Triumph 10
RickB standard size lug studs for 78 Midget? Spridgets 3
M Thak you and Metric or standard.... ? Austin Healey 5
B TR4/4A Adding OD to Standard TR4 Gearbox Triumph 18
wangdango Vandervell bearings for 100M, standard, main Austin Healey 3
bighealeysource Pertronix coil verus standard Lucas coil Austin Healey 3
QuickSilver Technical: Converting From Wire Wheel To Standard MG 6
kurts100 Bugeye Lever Shocks/Standard or Heavy Duty Rebuild Spridgets 14
hilsideser Standard 10 in S.C. on Craig's list for $300 Triumph 20
K TR2/3/3A Standard Continental Touring Kit for TR3 on EbayUK Triumph 0
K 1950 Standard Vanguard Other British Cars 2
Ohiobugeye Metric or US Standard Threads? Spridgets 26
Wirewheels Did the BJ7 come with OD standard? Austin Healey 11
germanmichel Standard clearance mainshaft of the transmission ? Austin Healey 3
W TR10 / Standard Axle for Lotus Triumph 10
pakiwi 1275 Cam Specs - Standard Spridgets 1
MadRiver TR6 Standard TR6 Tires? Triumph 2
ncbugeye Tyres for standard Bugeye rims Spridgets 1
G Standard Vanguard Paint Code Other British Cars 4
Alan_Myers If I had room, time, $! FS: '47 Standard Flying 14 Triumph 2
Sherlock Standard Herald [India] Other British Cars 5
A MGB How much Torque can a standard MGB gearbox handle? MG 5
bobh A Radical Idea? Or An Old Standard? Triumph 11
gsalt57tr3 1953 Standard Vanguard Phase II Other British Cars 0
gsalt57tr3 Standard Vanguard Triumph 2
gsalt57tr3 Standard Vangard in St. Louis MO Triumph 2
Webb Sledge David Vizard: Tuning Standard Triumphs Triumph 2
R air shocks vs.standard type? Triumph 3
Webb Sledge Tuning Standard Triumphs Triumph 0
4 1947 Standard Flying 14 Info Other British Cars 5

Similar threads

Back
Top