• Hey Guest!
    BCF is a resource offered at no cost to the Little British Car community. We do not require you to pay to play here. However, if you find BCF helpful, appreciate no pop up ads, and you want to ensure we stay online - Please support us with an "optional" low-cost (less than many car club dues) member upgrade. There are some benefits to upgrading!
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

ARP bolts

Share this page

healeyboz

healeyboz

Jedi Knight
Offline
ARP instructions for "stretching" the bolts says to torque the rod bolts to 50 lbs and release 2 times and leave at 50 the 3rd time. The books says that the rod cap bolts need to be torqued to 40 lbs. Which should I go with? Do I go with factory or do I go with ARP?

Barry
 
Also, make sure you carefully read the ARP instructions on proper lubrication of the bolts, as the torque specs will vary depending on the lubricant used.
Jeff
 
50 ft. pounds is correct, follow the ARP instructions. I've probably installed about a hundred sets.
 
As Jeff said, follow ARP and use the lubricant they recommend and sell.
 
Similar threads
Thread starter Title Forum Replies Date
D ARP big end bolts. Spridgets 7
T TR2/3/3A ARP connecting rod bolts Triumph 2
RedTR3 TR2/3/3A Moss [ARP] Flywheel Bolts Triumph 16
F Using 12 point ARP style rod and main bolts Spridgets 9
hondo402000 TR6 TR6, 71 model flywheel bolts, ARP Triumph 2
hondo402000 TR6 TR6 ARP head bolts Triumph 4
A ARP flywheel bolts--install Latest [no Loctite] Triumph 11
healeyboz ARP bolts Spridgets 5
ChrisS ARP Rod Bolts Spridgets 7
K TR2/3/3A Memory refresh: non ARP cylinder head studs..... Triumph 2
KVH General Tech ARP Head Studs/Liner Protrusion Triumph 10
DrEntropy MGB And now, NO ARP head studs to be found! MG 13
RJS TR4/4A ARP Head Stud Question Triumph 2
G TR4/4A ARP Bolt Torque Specs Triumph 10
T TR4/4A Should I use ARP Assembly Lubricant for Engine Assembly and Fastener Installation? Triumph 2
T TR4/4A Are the ARP head studs worth it? [ducks for cover] Triumph 19
R ARP head and connection rod studs? Spridgets 15
S I just bought ARP main stud kit 206-5405 Austin Healey 4
L ARP fastners. Spridgets 4
M ARP head studs Triumph 5
Basil ARP studs too short Triumph 18
DNK ARP Studs Triumph 74
Glen_B Torque for ARP mains Spridgets 1
hondo402000 TR6 ARP Head stud kit 71 TR6[ Where to buy] Triumph 10
G ARP Assembly Lubricant....how to use the stuff Triumph 9
martx-5 ARP Head Studs Triumph 21
Morris ARP studs torque and blown headgasket Spridgets 17
7 ARP bolt kits Triumph 2
Morris ARP Head studs torque... Spridgets 2
ChrisS ARP Head Studs Racing 2
CJ Burton MGB-GT Bolts for INERTIA STARTER on 1966 MGB GT MG 8
K TR2/3/3A Front brake hub removal to access Vertical Link bolts(screws) Attached pictures. Triumph 1
JPSmit Hypothetical Question of sorts - wheel bolts Restoration & Tools 12
shadowfever Midget seat nuts and bolts Spridgets 2
D TR2/3/3A Torque for bolts back of transmission ? Pl Triumph 0
KVH General Tech Flywheel Bolts Too Long For Main Seal Triumph 13
W Generator and Starter Long Bolts Spridgets 0
G HD8 Carb Banjo Bolts Austin Healey 2
T Storing nuts and bolts (so you can find what you need) Austin Healey 7
M Tranny Mount Bolts Spridgets 3
M TR2/3/3A oil pan bolts Triumph 16
AUSMHLY BJ8 Dowel Bolts Austin Healey 35
S TR2/3/3A Aluminum one time use stretch bolts Triumph 7
B McMaster Carr for bolts and fasteners Spridgets 8
K TR2/3/3A The guide bolts to help gearbox install? Triumph 19
charlie74 TR6 Bearing cap bolts Triumph 8
K TR2/3/3A Clutch and Brake Master Cylinder push rod stop bolts? Triumph 15
P Help with torquing bolts Restoration & Tools 3
G TR4/4A Radiator Fan and plates spanning bolts Triumph 6
AngliaGT Got Lucky Today - CHECK THOSE BOLTS! Spridgets 6

Similar threads

Back
Top